Dynatork Characteristics

Instant Stop-Start
Dynatork motors can stop-start and drive under load with characteristics similar to a Stepping Motor.

Low Air Consumption
Air consumption of a piston motor is positive as leakage is negligible giving maximum torque at minimum air consumption.

Max Torque at Start
Free Floating pistons transmit the maximum torque at the start which can be adjusted by the use of a pressure regulator.

Programmed Control
Dynatork air motors can be subject to programmed control by pulse counters to control rotation direction, speed and number of revolutions.

Speed Control
Speed control can be adjusted to fine limits by the use of restrictors on the exhaust ports. The speed can be instantly changed to a higher or lower speed due to fast response times.

Environmental Factor
Dynatork air motors have very low noise levels when compared with standard air motors. They can operate in harsh environmental conditions and are unaffected by airline condenstate.

Reversing
The reversing of the Dynatork Air Motors is achieved by using 5 port control valves, giving near instant response even under load.

Non-Lubricated
Dynatork Air Motors can be supplied for a non-lubricated gas supply in clean areas so eliminating contamination in a clean environment.