Dynatork Powergear 22J3

Free Piston Air Motor with Gearbox

Design
Co-axial gearboxes housed in rigid block design for high precision. Gear case pressure-tested before filling to eliminate oil leaks.

Mountings
Universal mounting either by foot or flange with an accurate spigot register.

Overhung Loading
3,000 newtons (670 lbs) at the midshaft position.

Lubrication
Units delivered with Mobilgear 630 mineral oil and lubricated for life.

Lubrication (Food Industry)
Units delivered with Mobil 'food machinery' lubricants to meet Food Safety Regulation 1995

Shafts
The output shaft is 30mm diameter and 60mm long with 8mm wide keyway to DIN 6885
sheet 1.

Approximate nett weight
1 stage 4.5 kg.
2 stage 5 kg.
3 stage 5.5 kg


Tools Request for Quote If you would like a quote for a product please click the Request for Quote button for the product you are interested in. You will be taken to a form where you will be required to fill in some extra information. Huco will then contact you with a quote. Downloads If there are any downloads available for a particular product this button will appear. If you click on the download button a list of availavle downloads will be shown. You need to be signed in to download	Ratio	Input Speed (rpm)
	Ratio	100	200	300	400	500
	70.32:1	1.42	2.84	4.27	5.69	7.11
	56.42:1	1.77	3.54	5.32	7.09	8.86
	40.85:1	2.45	4.90	7.34	9.79	12.24
	30.69:1	3.26	6.52	9.78	13.03	16.29
	24.64:1	4.06	8.12	12.18	16.23	20.29
	20.58:1	4.86	9.72	14.58	19.44	24.30
	15.3:1	6.54	13.07	19.61	26.14	32.68
	12.3:1	8.13	16.26	24.39	32.52	40.65
	10.26:1	9.75	19.49	29.24	38.99	48.73
	8.2:1	12.20	24.39	36.59	48.78	60.98
	4.67:1	21.41	42.83	64.24	85.65	107.07

FOR OUTPUT TORQUE AT 80 p.s.i. MULTIPLY RATIO BY 8 TO OBTAIN TORQUE IN NEWTON METRES - MAXIMUM TORQUE 200 NM CONTINUOUS (148 lb ft)